Standards |
ISO 8041:2005, ISO 2631-1,2&5, ISO 5349 |
Meter Mode |
RMS, VDV, MTVV or Max, Peak, Peak-Peak, Vector, A(8), Dose, ELV, EAV
Simultaneous measurement in six channels with independent set of filters and detector constants |
Filters |
Wd, Wk, Wm, Wb, Wc, Wj, Wg, Wf (ISO 2631), Wh (ISO 5349) and Band Limiting filters |
RMS & RMQ Detectors |
Digital true RMS & RMQ detectors with Peak detection, resolution 0.1 dB
Time constants from 100 ms to 10 s |
Measurement Range |
Transducer dependent |
0.01 ms-2 RMS ¡À 50 ms-2 Peak (with SV 38V and Wd filter) |
0.1 ms-2 RMS ¡À 5000 ms-2 Peak (with SV 50 and Wh filter) |
Frequency Range |
0.1 Hz ¡À 2828 Hz (transducer dependent) |
Data LoggerX |
Time-history data including meter mode results and spectra |
Time-Domain RecordingX |
Simultaneous x, y, z time-domain signal recording,
sampling frequency selectable: 375 Hz, 3 kHz or 6 kHz (option) |
AnalyserX |
1/1 octave real-time analysis with centre frequencies from 0.5 Hz to 2000 Hz (option)
1/3 octave real-time analysis with centre frequencies from 0.4 Hz to 2500 Hz (option) |
Accelerometer (option) |
SV 38V low cost and low power triaxial accelerometer for Whole-Body measurements
SV 50 set for Hand?Arm measurement (Dytran accelerometer 3023M2; adapters SA 50, SA 51, SA 52) X X
SV 105 integrated triaxial Hand-Arm adapter with grip force sensor (under development) |
X function parallel to the meter mode |
X X SC 118 integrated connector required |